Cookies allow for a variety of features that make your visit to Restek more enjoyable.

By using this website, you agree to the use of cookies in accordance with our guidelines. For more information, see our privacy policy.

01494 563377

Nitrogen Purifier Module*

Product Code: 22604

Email
Purifier Module, Nitrogen 1/4" Fittings
Price £580.00

Description

  • Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air.
  • Reduce gas impurities from ppm to low ppb levels.
  • Decrease baseline noise and increase GC/MS sensitivity.
  • Prepurged with the specified gas, to shorten downtime.

Performance for these purifiers is optimized by incorporating a multiple-bed format that progressively lowers concentrations of contaminants at each successive bed. VICI® Mat/Sen® purifiers are guaranteed to produce gases that are purer than 99.9999%, when supplied with gas of 99.995% purity, and are prepurged with the specified gas to speed conditioning. Purifier capacity is approximately four tanks of gas at 99.995% (50 ppm) purity, and correspondingly longer for purer gases.

Please Note: We recommend using an indicating oxygen trap (e.g., cat.# 22029, pg. ) downstream from a VICI® Mat/Sen® purifier to continually ensure gas purity and indicate absolute change-out time.

Specifications:
Length: 21″ (53.3 cm)
Diameter: 1.5″ (3.8 cm)
Maximum Inlet Pressure: 1,000 psi (6895 kPa)
Maximum Recommended Flow: 500 mL/min.
Pressure Drop from 120 psi (827 kPa) inlet at a flow of 0-500mL/min.: <0.20psi (1.4kPa)
Compression End Fittings: 1/8″ or 1/4″, stainless steel
Shipping Weight: 3.04 lb. (1,300 g)

*Warning: Do not use with nitrogen containing more than 500 ppm of oxygen. If the oxygen level in the stream exceeds 500 ppm, use an air purifier.

Shopping Cart

 x 

Cart empty


website button shop